Stamping Swing Type Robot Arm.
Description:
Name: Three-axis industrial robot Model: CP-V3-10-125
Four-axis industrial robot Model: CP-V4-10-125
Five axis industrial robot Model: CP-V5-10-125
All axes are driven by absolute position servo motor.
Y-axis(up and down axis) uses Taiwan high-precision linear guide
plus precision lead screw and high-precision servo, to realize
high-precision high-speed smooth up-and-down positioning.
S-axis (main axis of rotation) uses Japan robot dedicated hollow
reduction gear plus Taiwan high precision servo to achieve
high-speed precision gapless positioning.
X-axis (front and rear telescopic shaft) uses Taiwan high-precision
linear guide plus precision lead screw and high-precision servo, to
realize high-precision high-speed positioning.
The robot body is made of blackened high strength steel. The main
axis of rotation is made of high strength aluminum profile. The
hood is made of sheet metal with stoving varnish. It has the
features of simple structure, high strength, beautiful appearance
and durability.
Parameters:(Customization available)
1. Max load: 10KG Radius: 1250MM
2. Repeated Positioning Accuracy: ±0.1MM
3. Installation way: Floor type
4. Y Axis Up-and-down Stroke: 420MM Max Speed: 500MM/S
5. S Axis Rotation Stroke: +-270° Max Speed: 156°/S
6. X Axis Advance and Retreat Stroke: 600MM Max Speed:1.56M/S
7. X Axis Rotation Stroke: 360° Max Speed: 360°/S
8. Weight: 330KG Environment: 0-45 ℃
9. RH: 30%~95% Noncondensing
10. Color: Primary (others available)
Control System:
1. Dedicated industrial robot control system PTP point-to-point
control mode
2. 8-inch color touch screen handheld controller, multi-language
user interface, easy to operate, convenient and user-friendly.
3. Open teaching methods, easier and intuitive robot programming,
without PLC engineers, end-users can also be programmed in the
production site.
4. Support multiple product program storage to connect with any
punch press, interlock function
5. Coordination among multiple robots of continuous punch press
adopts CAN bus communication. The response speed of manipulator is
faster and the efficiency is higher. Simple connection requires no
complex I / O signal connection
6. With USB port, U disk can be used to upgrade the program and
manage and share parameters.
7. Position of mobile arm can be quickly set. The robot arm can be
manually moved to the target position, and then set the current
site as the automatic operation position. The knob-type pulse
trimmer for precise positioning can also be used in this process,
so the set value is more accurate and convenient.
8. Maximum power: 2.50 KW Electric control box: Integrated electric
box
9. With stand Mobile Teach Pendant, Cable length 3 m
10. Protection class: IP20 Humidity: up to 95%, no condensation
11. Ambient temperature 0 - 45 ° C
Power: single-phase plus ground, 220V voltage
Characteristics
With four degree of freedom, left and right rotation, up and down,
back and forth, end rotation, there is no requirement of the center
of the mold height, spacing. Non-standard customization is
available to meet different load and arm stretching, according to
customer requirements.
1. All servos are absolute position servos. Mechanical origin is no
need to be relocated after power off and restart, and the origin
can be quickly repositioned according to the servo memory. There is
no origin sensor switch to reduce the failure rate.
2. The main axis of rotation uses robot-specific high-precision
hollow reduction gear, with features of compact, beautiful, strong
steel, torque and impact resistance.
3. The main feature of this model is the rotation of the rotating
shaft. The structure is ascending and descending first and rotating
afterwards. The center of gravity is moved closer to the center of
rotation so as to obtain better rotation speed and accuracy.
4. The level rotation and flip up and down of terminal uses robot
coupling drive mechanism. The two driving motor are rear positioned
and relatively static, thus greatly improving the stability of the
device and the load capacity of the end.
5. Equipped with mixed connection unit, multiple sets can be
connected to work together and entire line can be split into
several small sections to operate.
6. Because of the mixed connection unit, the arm can move freely,
and man-machine mixed operation is also available, which is
convenient for arranging personnel to work in places which are
unsuitable for arm.
7. Equipped with intelligent programming system, easy to learn.
Every time when mold is changed, The reprogramming only takes five
minutes.
8. Electric box and the host integrated design helps arm occupy
less space and is more convenient for installation and
repositioning. The stamping robot arm is more efficient and
user-friendly than any brand of general-purpose six-axis robot.
Also, it is better in precision, service life, speed, user-friendly
than other same function arms.
Tailored solutions and after-sales service for customers are
provided to solve all kinds of problems to ensure that robot adapts
to a variety of working environment.
